TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;SI-40
Max tool diameter;mm;200
Max tool length;mm;According to the requirements
Max force compression;kgf;60000
Max force tension;kgf;40000
Max compression time;s;90
Max tension time;s;70
Stroke;mm;1000
Maximum system pressure;bar;200
Minimum system pressure;bar;10
Power consumption;kW;11
Tank volume;l;100
Display; ;a digital indicator or a data logging system with a touch screen
Fluid type; ;Mineral oil for hydraulic systems in accordance with DIN 51524, part 2 and 3: ISO VG from 10 to 68 in accordance with DIN 51519. Viscosity 10...35 mm2/s
Maximum fluid temperature;degree С°;70
Power supply; ;380V, 50Hz
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;SI-80
Max tool diameter;mm;300
Max tool length;mm;According to the requirements
Max force compression;kgf;100000
Max force tension;kgf;85000
Max compression time;s;90
Max tension time;s;70
Stroke;mm;1000
Maximum system pressure;bar;200
Minimum system pressure;bar;15
Power consumption;kW;11
Tank volume;l;100
Display; ;a digital indicator or a data logging system with a touch screen
Fluid type; ;Mineral oil for hydraulic systems in accordance with DIN 51524, part 2 and 3: ISO VG from 10 to 68 in accordance with DIN 51519. Viscosity 10...35 mm2/s
Maximum fluid temperature;degree С°;70
Power supply; ;380V, 50Hz
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;SI-110
Max tool diameter;mm;300
Max tool length;mm;According to the requirements
Max force compression;kgf;90 000
Max force tension;kgf;120 000
Max compression time;s;90
Max tension time;s;70
Stroke;mm;1000
Maximum system pressure;bar;200
Minimum system pressure;bar;10
Power consumption;kW;18,5
Tank volume;l;280
Display; ;a digital indicator or a data logging system with a touch screen
Fluid type; ;Mineral oil for hydraulic systems in accordance with DIN 51524, part 2 and 3: ISO VG from 10 to 68 in accordance with DIN 51519. Viscosity 10...35 mm2/s
Maximum fluid temperature;degree;70
Power supply; ;380V, 50Hz
Downhole Motor Tester is designed for quality control testing of downhole motors (downhole hydraulic motor / DDM) maintenance and getting measurements.
The operator's computer (console) equipped with specially designed software that records data from the DDM (rpm, torque, efficiency, etc), provides high data processing speed for graphing and test reports.
DOWNHOLE MOTOR TESTER SI40-DDM
Designed for testing downhole drilling motors from 85 to 240 standard sizes
In order to avoid the destruction of the building during testing, specially prepared site is needed, equipped with vibration supports that contact tester and workshop foundations
DOWNHOLE MOTOR TESTER SI13-DDM
Designed for testing downhole drilling motors from 54 to 127 standard sizes
No serious interventions are required in the workshop during testing
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;SI13-DDM;SI40-DDM
Diameter range;mm;54…127;85-240
Fluid; ;Process water (drilling mud);Process water (drilling mud)
Maximum fluid supply;l/sec;15.6 at max pressure 9.5MPa and 7.5 at max pressure 32MPa;45 at 7 MPa
Minimum fluid supply;l/sec;3;5
Liquid pressure;MPa;32;16,5
Maximum braking torque;kNm;10;20
Drive power; ;Electric motor;Diesel Generator / Diesel Engine / High Power Electric Motor
Supply voltage;V;380;660
Energy consumption;kW;145;660-1000
Maximum axial force;ton;6;6
Working temperature;degree;+5…+40;+5…+40
Vise; ;Mechanical;Hydraulic
Over-all frame size;mm;10000х1200х1300;13000х2000х1500
Hydrostatic tester / High pressure tester is designed for testing equipment with high pressure. Some of the parameters can be changed according with client’s technical specifications:
the over-all size of the armored chamber (the standard module is 6 m long; it is possible to connect several modules to each other; two-layer wall construction to ensure safety)
the maximum pressure
fluid type
The test data is stored in the PC memory (PDF).
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;HYDROSTATIC TESTER / HIGH PRESSURE TESTER
Maximum pressure for “high pressure system”;bar;0-1000
Maximum pressure filling system;bar;6
Сontrol method; ;mechanical valve
Forced heating; ;without
Working fluid; ;Hydraulic oil, anti-freezing liquid, water
High pressure protection; ;Armored camera
Tank volume;l;1000
Log; ;Operator panel with surcharge pressure + visual indication (manometers). Data is stored in the operator panel with the ability to withdraw them to flash drive. Operator enters data about the product being tested on the panel (the operator’s name, date). Video recording in an armored camera with data storage for 3 hours and output to a separate display on the operator panel.
Power supply; ;380V,50Hz
Working temperature;degree;+5…+30
Operation mode; ;Manual
THE MAIN COMPONENTS OF HYDROSTATIC TESTER / HIGH PRESSURE TESTER
Armored camera module (hydraulic lifting of the lid, controlled from the operator's console, lighting, video surveillance, draining of the working fluid, mounting for the equipment under test)
A pumping unit with a control panel that includes a system for recording operating parameters
Let us know if you have any questions
Contact us by email
LEAKAGE TESTER
Leakage tester is designed for tubing pressure testing at various stages of manufacture and operation.
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;LEAKAGE TESTER
Performance;pipe/hour;22
Changeover time using a crane beam;min;20
Pipes diameter;mm;102,114,140,146,168,245
Pipe length;m;6-13
Working fluid; ;Process water for a high-pressure supply system, aqueous propylene glycol solution for the filling system
Maximum fluid pressure;MPa;70
Total capacity;kW;45
Air pressure;MPa;6-8
Pipe fixation; ;Hydraulic chock clamps
Type of sealing; ;Threadless
Operation mode; ;Automatic, manual, semi-automatic
Archiving of test data; ;Up to 200 days, with data withdraw to flash drive
Operating temperature;degree;+5...+45
Power supply; ;380V, 50Hz
Security system; ;Pull-wire switches in the open areas of the tester + 2 video cameras with data withdraw to the operator panel
Preservation temperature;degree;-30…+45
Warranty; ;12 months from the date of commissioning, but no more than 18 months from the date of shipment to the customer
Over-all size;mm;15000x3000x1300
Tank volume;l;1000
High pressure system tank volume (liquid is added into the tank by filling up or connecting to the workshop's water supply system, through a filtration system. Reuse of liquid from the tester is not allowed);l;1000
Submersible electric motor stator tester is designed for pressing / decompressing PAD stators (submersible electric motors). Indication and control system display the main parameters of the system; the data is recorded in the PC. Some of the parameters can be changed according with client’s technical specifications:
total length and number of serviced items (power frames are interconnected so tester length and sizes of the serviced item are variable)
pressing /decompressing force
winch force
number of auxiliary and main moving blocks
сontrol mode (manual with radio control, remote, mixed)
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;SUBMERSIBLE ELECTRIC MOTOR STATOR TESTER
Maximum installation diameter;mm;250
The force developed by the press to push out;KN (kgf);2000 (200000)
The force developed by the press for retraction;KN (kgf);1500(150000)
Stroke of the hydraulic cylinder rod of the press;mm;1200
Rod extension speed;m/s;0.014
Rod retraction speed;m/s;0.017
Winch capacity;ton;5
System of indication of push / pull; ;Manometer, indicator
Hydraulic station power supply; ;3 phase, 380V, 50Hz
Electric motor power;kW;18.5
The frequency of motor rotation;Rpm;1460
Maximum system pressure;MPa (bar);15 (150)
The type of working fluid; ;Oil Lukoil Geyser ST32
Filtration of working fluid; ;Recommended purity level = 2718/13 in accordance with DIN ISO 4406, nominal filtration fineness as of 10 microns
Maximum operating fluid temperature;degree;70
Over-all size;mm;28031х1090х1741
THE MAIN COMPONENTS OF SUBMERSIBLE ELECTRIC MOTOR STATOR TESTER
Power frame
Extension frame
Winch
Final extension frame
Tap wrench
Jack replaceable brass
Jack
Stop block
Tap wrench frame
Let us know if you have any questions
Contact us by email
DISMANTLE TORQUE MACHINE
Dismantle torque machine is designed for the make-up and break down operations of threaded connections in electric centrifugal pumps and submersible electric motors using an air-operated wrench (pneumatic powered wrench).
DISMANTLE TORQUE MACHINE
Dismantle torque machine is designed for the make-up and break down operations of threaded connections in electric centrifugal pumps and submersible electric motors using an air-operated wrench (pneumatic powered wrench).
DISMANTLE TORQUE MACHINE
Dismantle torque machine is designed for the make-up and break down operations of threaded connections in electric centrifugal pumps and submersible electric motors using an air-operated wrench (pneumatic powered wrench).
DISMANTLE TORQUE MACHINE
Dismantle torque machine is designed for the make-up and break down operations of threaded connections in electric centrifugal pumps and submersible electric motors using an air-operated wrench (pneumatic powered wrench).
TECHNICAL SPECIFICATIONS;UNIT OF MEASUREMENT;DISMANTLE TORQUE MACHINE
System of indication; ;Manometer
Hydraulic station power supply; ;3 phase, 380V, 50Hz
Electric motor power;kW;7.5
Maximum system pressure;MPa (bar);20 (200)
Maximum installation diameter;mm;200
The type of working fluid; ;Mineral oil for hydraulic systems in accordance with DIN 51524, part 2 and 3: ISO VG 10 to 68 in accordance with DIN 51519. Viscosity is 10...35 mm2/s.
Filtration of working fluid; ;Recommended purity level = 2718/13 in accordance with DIN ISO 4406, nominal filtration fineness as of 10 microns.
Maximum operating fluid temperature;degree;70
Wrench and wrench control system; ;Not included
Over-all size;mm;2286x1067x1310
Weight (without working fluid);kg;950
Cookies are necessary for the website to function and they also help to improve it. By using this site, you accept their application and agree with Privacy Policy